Vertical type single spiral extruder (mainly used in the ceramic industry, low output)
It is characterized by including an electrical connection, a pneumatic connection, and a mechanical connection portion.
The mechanical connection part mainly includes a lower extrusion extrusion part and an upper stirring part.
The lower extrusion section includes a mud tank, a lower vacuum box, a lower extrusion spindle, a lower extrusion screw, a pressure screw, a mud shaft, a mud shaft to a roller tooth, a lubrication pump, a pneumatic clutch, and a lower cascade group. Belt, lower drive pulley, lower drive motor. A transition vacuum box is installed on the lower vacuum chamber, and a superior stirring granulation portion is installed on the transition vacuum box.
The upper stirring part mainly comprises a superior stirring granulation spindle, a stirring knife and a granulating spiral, and a set of bearings are mounted on the upper stirring granulation spindle, and the upper and lower ends of the bearing have a skeleton oil seal.
Suitable for cement, ceramic industry, small output
Good plasticizing effect, with advanced screw type.
The feeding section has a forced water cooling system to ensure the extrusion molding process of the product, which is unmatched by other extruders.
With the corresponding screw, head, auxiliary machine and auxiliary equipment, it can produce plastic pipe, film, wire, belt, plate, profile, cable sheath and other products.
The single-screw extruder is mainly used for extruding thermoplastics such as soft and hard polyvinyl chloride and polyethylene. It can process a variety of plastic products, such as blown film, squeeze tube, pressure plate, ribbon, etc., and can also be used for melt granulation. The plastic extruder has advanced design, high quality, good plasticization and low energy consumption. It adopts involute gear transmission, featuring low noise, stable operation, large bearing capacity and long service life.
| Item | Capacity(T) | Extruding pressure(Mpa) | Dimension(M) | Power(KW) | Weight(T) |
| KLJ35L | 7 | 3.0 | 5*1.8*3.2 | 55+15 | 10 |
| KLJ40L | 10 | 3.0 | 5*2.0*3.2 | 75+15 | 12 |
| KLJ56/45L | 15 | 4.0 | 6*2.0*3.5 | 90+22 | 14 |